耐磨管的产品特点:
Product characteristics of wear-resistant pipe:
一、耐磨性好:陶瓷内衬钢管的内衬陶层为刚玉陶瓷，其维氏硬度在1100HV以上。特别适合电力、矿山、煤炭行业输送、固体等介质。其使用寿命比普通钢管高10倍以上。
1. Good wear resistance: Corundum ceramics is the lining ceramics of the ceramic-lined steel pipe, and its Vickers hardness is above 1100 HV. Especially suitable for power, mining, coal industry transportation, solid and other media. Its service life is more than 10 times longer than that of ordinary steel pipe.
二、耐磨腐蚀、防结构垢：由于刚玉陶瓷耐磨弯头属中性材料，具有能耐酸、强腐蚀介质和卤盐腐蚀的特性，同时具有防结垢的性能。
2. Anti-corrosion and anti-scaling: Because corundum ceramics wear-resistant elbow is a neutral material, it has the characteristics of acid resistance, strong corrosive medium and halogen corrosion resistance, as well as anti-scaling performance.
三、耐高温性能好：陶瓷内衬钢管可在－50℃至800℃湿度范围内长期正常运行，复合管线膨胀系数小。
3. High temperature resistance: Ceramic lined steel pipes can operate normally for a long time in the humidity range from - 50 ~800 ~C, and the expansion coefficient of composite pipes is small.
四、安装施工方便：陶瓷复合管可采用焊接、法兰、柔性快速接头等联接方式，因重量轻、抗冲击、不怕磕碰等优点。运输、施工安装十分方便，可减少安装费用。
4. Easy installation and construction: Ceramic composite pipes can be joined by welding, flange, flexible fast joint, etc., because of its advantages of light weight, impact resistance and no fear of knocking. Transportation, construction and installation are very convenient, and installation costs can be reduced.
五、节约工程造价：陶瓷内衬钢管可代替价格昂贵的不锈管、钛管、镍管、铸石管、合金耐磨管，可大大降低工程造价。产品性价比高，可节省检修、   换材料的费用和时间。
5. Cost savings: Ceramic lined steel pipes can replace expensive stainless steel pipes, titanium pipes, nickel pipes, cast stone pipes and alloy wear-resistant pipes, which can greatly reduce the cost of construction. The product has a high cost performance ratio, which can save the cost and time of maintenance and material replacement.